View products
Products
Contact us
Contact us

Hawk Evo Forward

Scroll to learn more

The Hawk Evo Forward arm is perfect for farmers, contractors and municipal environments where the added benefits of a forward arm is required to improve visibility and minimise operator stress and fatigue.

Fitted as standard with the powerful 125 litre drive system, the Hawk Evo Forward will perform on all stages. There is a choice of controls and attachments to suit a wide range of applications.

Key Features:

  • 5.4m or 6.0m reach
  • Heavy Duty Linkage
  • 125 l/min independent system
  • 1.2m or 1.5m cutting head
  • Non parallel

Product Specifications

Standard = Standard   Optional = Optional   Not Available = Not Available

Model FWD 5.4 (17’9″) FWD 6.0 (19’8″)

Tractor Requirements

Minimum horse power 65hp 70hp
Minimum weight 4500kg / 9921Lbs 5000kg / 11023Lbs

Base Unit Mounting Options

Front mount Not Available Not Available
Mid-mount Not Available Not Available
Rear mount Standard Standard
Three point linkage (CAT II) Standard Standard
Axle bracket Optional Optional

Overall machine parameters

Machine weight with head and oil 1640kg / 3616Lbs 1740kg / 3836Lbs
Capacity of oil tank 200L / 53USG 200L / 53USG
Weight of machine with oil but without head 1400kg / 3086Lbs 1500kg / 3307Lbs

Controls

Cable control (CC) Standard Standard
Low pressure hydraulics (LPH) Optional Optional
Electronic switch control (ESC) Optional Optional
Electronic proportional control (EPP) Optional Optional
Intelligent control system (ICS) Optional Optional
Cable rotor reverse Optional Optional
Electronic rotor reverse Optional Optional

Hydraulic system

System capability 60hp 74hp
Pump flow rate 104L / 27.5Usg 125L / 33Usg
Pump type (Gear / Piston / Helical) Gear Gear
Pump arrangement (Twin / Tandem Inline) Twin Twin
Independent hydraulics Standard Standard
Oil cooler Optional Optional

Arm features and main frame  

Forward reach arm Standard Standard
Forward reach 800mm / 2’6″ 800mm / 2’6″
Power slew Standard Standard
Power slew angle 94° 94°
Gravity breakout protection Not Available Not Available
Hydraulic breakout protection Standard Standard
Arm float – Manual operation Optional Optional
Armfloat – Electronic operation Optional Optional
Head float – Manual operation Standard Standard
Head float – Electronic operation Optional Optional
Left hand cutting Optional Optional
Right hand cutting Optional Optional
Left and right hand cutting Not Available Not Available

Arm attachments available  

Variable track bracket (VTB) Not Available Not Available
Sheartrim cutter bar Optional Optional
Pro-Saw Optional Optional
Ditch cleaner Not Available Not Available
Rotary head Optional Optional

Accessories

Road Lights Standard Standard
Debris Blower Optional Optional
Cab Guard Kit Standard Standard

Cutting Heads

1.2m Pro-Trim with 115mm roller Optional Optional
1.2m Pro-Trim with 150mm roller Optional Optional
1.2m Pro-Trim ISMP with 115mm roller Optional Optional
1.2m Pro-Trim ISMP with 150mm roller Optional Optional
1.5m Pro-Trim with 115mm roller Optional Optional
1.5m Pro-Trim with 150mm roller Optional Optional

Flails

See the table below to see which flail heads are available for the different cutting heads listed above.

  BB MP44 HS60 Pro Flail T40 T60 True Cut Bushmaster
1.2m Pro-Trim with 115mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available
1.2m Pro-Trim with 150mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available
1.2m Pro-Trim ISMP with 115mm Roller Optional Optional Optional Optional Optional Optional Optional Standard
1.2m Pro-Trim ISMP with 150mm Roller Optional Optional Optional Optional Optional Optional Optional Standard
1.5m Pro-Trim with 115mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available
1.5m Pro-Trim with 150mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available

Working Reach Dimensions

Head used to calculations: 1.2 Pro Trim


  FWD 5.5m (17’9″) FWD 6.0m (19’8″)
A 5.36m 17’7″ 5.96m 19’7″
B 5.52m 18’1″ 6.08m 19’11”
C 3.50m 11’6″ 4.21m 13’10”
D 4.87m 16′ 5.19m 17′
E 6.65m 21’10” 7.27m 23’8″
X 1.35m 4’5″ 1.35m 4’5″
Y 1.0m 3’3″ 1.0m 3’3″

Our range of Accessories for the Hawk Evo Forward

Attachments

A wide selection of attachments is available to improve the versatility and therefore the profitability of the Bomford arm mowers range.

Attachments

Controls

Every machine has a choice of tailormade control systems available on most arm mowers.

Controls

Flails

The vast majority of our heads now offer the ability to fit any one of eleven flail designs.

Flails

Heads

Most heads offer a choice of flails and ability to adjust rotor speed to suit verge or hedge.

Heads

Still need help or advice? Why not contact one of our team

    or call: +44 (0) 1789 773383 to speak to one of our team

    Find Your Local Dealer

    click here to locate

    Service & Support

    World-class sales support with specialist advice direct from the manufacturer
    Read more

    Downloads

    Get the latest downloads of our brochures and price lists
    Read more

    Bomford Plus

    Sales, parts and warranty information for existing Bomford Turner customers
    Read more

    Want to know more about our products?

    Bomford Turner
    Station Road, Salford Priors, Nr Evesham,
    Worcestershire, WR11 8SW, UK
    Fax +44 (0) 1789 773383
    © 2021 Bomford Turner Ltd Bomford Turner Ltd. is a member of the Alamo Group Registered in England & Wales. Company No: 529499 Site designed by The Lines Group
    • Follow Us
    • Facebook
    • Twitter
    • Instagram
    • Youtube