|
Heads
|
We at Bomford are very proud of the power delivered to the cutting head, reflecting
our efficient engineering designs.
Flail headfitment is dependent on the model purchased, with a choice avalaible on
most. The range starts with 800mm cutting width and rises to a full 1.5m. Most heads
offer a choice of flails and the ability to adjust the rotor speed to suit verge
or hedge.
|
|
 |
950 / 1257 LW
|
- The 950 and 1257 LW heads are lighter weight, for smaller machines. Direct driven
from an end drive motor reducing the overal weight as there is no need for belts
and pulleys.
|
|
 |
1107 MW
|
- The 1107 MW heads are of medium weight buth with all the advantages that belt drive
gives, close-in cutting and damage limitation from unseen obstacles.
|
|
 |
Pro-Trim
|
- The Pro-Trim range offers double-helix shaft technology delivering up to 45% overlap
of the flails, belt driven protection against unseen debris and slose in cutting
and interchangeable shaft options allowing speedy flail change times.
|
|
 |
Pro-Cut
|
- The Pro-Cut range is heavier duty and offers double helix shaft technology delivering
up to 45% overlap of the flails, belt driven protection against unseen debris and
close in cutting and interchangeable shaft options allowing speedy flail change
times.
|
|
 |
Double Helix Shaft
|
- The Pro Trim/Cut range offers double helix shaft technology (a Bomford Innovation)
delivering up to 45% overlap of the flails, belt driven protection against unseen
debris and close in cutting.
|
|
 |
Anti Wrap
|
- Pro-Trim, Pro-Cut and ISMP heads are equipped with "Anti Wrap" bearings to reduce
the risk of debris fouling the all important rotor bearings.
|
|
 |
ISMP
|
- The ISMP head enables the whole shaft assembly to be changed saving considerable
down time when different flails are required for different jobs. Bushmaster flails,
for example, are perfect for three year growth, but on a different growth a change
to a standard double helix can be kept ready for use in suit on the shaft to be
replaced as one unit.
|
|
 |
Variable Track Bracket
|
- The new variable track bracket has been designed for operators who need to work
in restrictive areas such as narrow lanes. Prefect for getting up close and personal
to hedges on rural roads and country estates.
|
|
 |
Belt Drive Verses Direct Drive
|
- The belt housing on belt driven heads typically 75mm narrower than the end drive
motors enabling the head to get closer in to the hedge or fence. Belt drives can
slip when the rotor hits an obstacle were direct shaft driven end drive may sheer
resulting in expensive repairs and prolonged down time.
|
|
 |
2 Meter HD
|
- The 2m head offers the widest cutting width on the market, heavy duty build and
a range of flail choices.
|
|
|
Head Weights - Page 4 |
 |
|
System Compatibility - Page 3 |
|
|