 |
Rotary Heads
|
- Ideal for longer material Bomford's Rotary Heads, Blade or HD Chain cutting options,
operating in either vertical plane or horizontal plane, its 2.25m sq cutting area
makes short work of even the most challenging of tasks.
|
|
 |
Ditch Cleaner
|
- The ditch cleaner head is both compact and powerful, capable of operating in wet
or dry conditions the Bomford ditch cleaner can be turned through 90 degrees and
used to clean existing roadside "grips" and can be changed from left to right and
visa versa in minuites. The Bomford ditch cleaner has a choice of blades and cutting
teeth.
|
|
 |
Blade-Runner
|
- Blade Runner is offered with a choice of three or four blade configurations, and
optional blade diametersof 600mm, 650mm or 700mm. Centralised bearing lubrication
results in very low maintenance and its fast belt tension system allows adjustment
without removal of blades. The 700mm four blade option will cut through materials
of 350mm diameter.
|
|
 |
1500 Cutter Bar
|
- Rear mounted piston motor with "wobble block" action to sectional knife
- Maximum cutting ability 20mm diameter
- Cutting width 1500 mm specially designed for B315
|
|
 |
Standard Sheartrim
|
- Hydraulic motor drive and pitman wheel to "sectional" reciprocating Bomford cutter
bar
- Standard 70mm square clamp mount
- Hydraulic flow divider and overloader protection (max flow 60 litre/min - min flow
30 litre/min )
- Maximum cutting ability 20mm diameter
- Lenth available 1500mm only
- Suitable for Kestrel, Harrier, Hawk and Falcon
|
|
 |
Medium Duty Sheartrim
|
- Hydraulic ram and shuttle valve to solid tool steel cutter bar
- Standard Bomford 70mm clamp mount
- Overload/reversing valve protection
- Maximum cutting ability 50mm diameter
- Hydraulic requirement 34-45 litre/min at 240 bar max
- Lengths available 1600mm or 2000mm
- Suitable for Kestrel, harrier, hawk and Falcon
|
|
 |
Heavy Duty Sheartrim
|
- Hydraulic ram and shuttle valve to solid steel cutter bar
- Standard Bomford 70mm clamp mount
- Overload/reverse valve protection
- Maximum cutting ability 100mm diameter
- Hydraulic requirements 40-45 litre/min at 240 bar max
- Length available 1350mm or 2200mm
- Suitable for Falcon, Buzzard and B81-81
|
|