Turbo Mower

The Turbo Mower Elite, Euro, Open and Pro range offers operators a huge choice of cutting widths at very cost effective prices.

A well designed and constructed range, the Turbo Mower is built with durability and ease-of-use in mind – a low maintenance machine that is simple to operate.

Key Features

  • Turbo Mower 1.3m, 1.5m, 1.9m, 2.25m, 2.3m, 2.45m, 2.5m, 2.7m and 2.8m cutting widths
  • Front mount options
  • 1.3 and 1.5 manual offset
  • Hydraulic offset standard on 1.9m and above
  • Standard fitted roller and side skids
  • Cat II three point linkage mounted
  • Over run slip clutch protected

Product Specification

Elite

ModelsElite 130Elite 150Elite 190Elite 225Elite 245Elite 270
Working Width 1.3m / 4'3 1.45m / 4'9" 1.9m / 6'4" 2.26m / 7'5" 2.42m / 8' 2.72m / 8'10
Overall Width 1.47m / 4'10" 1.63m / 5'4" 2.1m / 6'10" 2.45m / 8' 2.6m / 8'6" 2.90m / 9'6"
Weight 213kg / 469lbs 237kg / 522lbs 451kg / 994lbs 554kg / 1221lbs 596kg / 1313lbs 632kg / 1393lbs
Hydraulic Offset Not Available Not Available Hydraulic Operation Hydraulic Operation Hydraulic Operation Hydraulic Operation
Fully offset left of centre Not Available Not Available 400mm / 15¾" 400mm / 15¾" 400mm / 15¾" 400mm / 15¾"
PTO speed 540 540 540 540 540 1000
Front mount Not Available Not Available Not Available Not Available Not Available Not Available
No. of Flails (Whale Tail) 18 20 24 28 30 34
Power requirements 30-37hp 35-40hp 45 - 60hp 55-75hp 65-90hp 75-100hp
Cutting height 32-111mm / 1¼"-4½" 32-111mm / 1¼"-4½" 32-111mm / 1¼"-4½" 32-111mm / 1¼"-4½" 32-111mm / 1¼"-4½" 32-111mm / 1¼"-4½"
Roller size 114mm / 4½" 114mm / 4½" 140mm / 5½" 140mm / 5½" 140mm / 5½" 140mm / 5½"

Euro

ModelsEuro 250Euro 280
Working Width 2.5m / 8'3" 2.8m / 9'2"
Overall Width 2.67m / 8'9" 3.0m / 9'10"
Weight 867kg / 1911lbs 939kg / 2070lbs
Hydraulic Offset Hydraulic Operation Hydraulic Operation
Fully offset left of centre 500cm / 19¼" 500cm / 19¼"
PTO speed 1000 1000
Front mount Standard Standard
No. of Flails (Whale Tail) 28 32
Power requirements 65-110hp 75-110hp
Cutting height 43-88mm / 1¾"-3½" 43-88mm / 1¾"-3½"
Roller size 170mm / 6¾" 170mm / 6¾"

Open

ModelsOpen 250Open 280
Working Width 2.44m / 8' 2.77m / 9'1"
Overall Width 2.67m / 8'9" 3.0m / 8'11"
Weight 859kg / 1893lbs 928kg / 2045lbs
Hydraulic Offset Hydraulic Operation Hydraulic Operation
Fully offset left of centre 500mm / 19¾" 500mm / 19¾"
PTO speed 1000 1000
Front mount Not Available Not Available
No. of Flails (Whale Tail) 28 32
Power requirements 65-100hp 75-110hp
Cutting height 32-111mm / 1¼"-4½" 32-111mm / 1¼"-4½"
Roller size 170mm / 6¾" 170mm / 6¾"

Pro

 ModelsPro 250Pro 270Pro 3000
Working Width 2.45m / 8' 2.7m / 8'10" 3.0m / 9'10"
Overall Width 2.73m / 8'11" 2.98m / 9'9" 3.28m / 10'9"
Weight 1210kg / 2667lbs 1284kg / 2830lbs 1390kg / 3064lbs
Hydraulic Offset Hydraulic Operation Hydraulic Operation Hydraulic Operation
Fully offset left of centre 400mm / 15¾" 400mm / 15¾" 400mm / 15¾"
PTO speed 1000 1000 1000
Front mount Standard Standard Standard
No. of Flails (Whale Tail) 20 24 26
Power requirements 68-80hp 80-120hp 90-135hp
Cutting height 45-157mm / 1¾"-6¼" 45-157mm / 1¾"-6¼" 45-157mm / 1¾"-6¼"
Roller size 220mm / 8¾" 220mm / 8¾" 220mm / 8¾"