Microklippa

The Microklippa is very popular with estate managers and horticulturists who admire the Microklippa's fine cutting capabilities when hedge trimming and the versatility of the right or left hand cutting.

The Microklippa can be used on a range of power units from small compact tractors to small pivot steer loaders, in conjunction with a front mount kit.

Key Features:

  • 3.2m or 3.5m reach
  • Left or Right hand cutting (swing over capability)
  • Cable or Electronic Proportional Controlled (EPC) options
  • Front mount option and 16-22 litres per minute.

Product Specifications

Standard = Standard   Optional = Optional   Not Available = Not Available

Models3.2m (10'5")3.5m (11'5")

Tractor Requirements

Minimum Horse Power
15hp 15hp
Minimum Weight
550kg / 1213lbs 550kg / 1213lbs

Base Mounting Options

Front Mount
Not available Not available
Mid Mount
Not available Not available
Rear Mount

Standard

Standard
Three Point Linkage (CAT II)  Standard Standard
Axle Bracket  Not available Not available

Overall Machine Parameters

 Machine weight 192kg / 423lbs 201kg / 443lbs
Capacity of oil tank
Not available

Not available

Controls

Cable control (CC) Standard

Standard

Electronic proportional control (EPC) Optional

Optional

Intelligent control system (ICS) Not available

Not available

Low pressure hydraulics (LPH) Not available

Not available

Cable rotor reverse Not available

Not available

Electronic rotor reverse Not available

Not available

Arm features and main frame

Telescopic arm Not available

Not available

Telescopic arm stroke Not available

Not available

Power slew Not available

Not available

Power slew angle Not available Not available
Gravity breakout Optional Optional
Hydraulic breakout Not available Not available
Armfloat - manual Not available Not available
Armfloat - electronic Not available Not available
Headfloat - manual Not available Not available
Headfloat - electronic Not available Not available
Left hand cutting Not available Not available
Right hand cutting Optional Optional
Left and right hand cutting Optional Optional

Cutting heads

Rotary Head Not available Not available
1.2m and 1.5m cutterbars Optional Optional
Ditch cleaner Not available Not available

 

Working Reach dimensions

Head used for calculations: 1.2m Cutterbar

 3.2m (10'5)3.5m (11'5)

A

3.10m 10'2"  3.4m 11'2"

B

3.20m 10'6"  3.50m 11'6"

C

2.00m 6'6"  2.30m 7'7"

D

3.10m 10'2"  3.50m 11'6"

E

4.20m 13'9"  4.50m 14'9"

X

1.00m 3'4"  1.00m 3'4"

Y

1.34m 4'7"  1.34m 4'7"