Hawk Evo Forward

The Hawk Evo Forward arm is perfect for farmers, contractors and municipal environments where the added benefits of a forward arm is required to improve visibility and minimise operator stress and fatigue.

Fitted as standard with the powerful 125 litre drive system, the Hawk Evo Forward will perform on all stages. There is a choice of controls and attachments to suit a wide range of applications.

Key Features:

  • 5.4m or 6.0m reach
  • Heavy Duty Linkage
  • 125 l/min independent system
  • 1.2m or 1.5m cutting head
  • Non parallel

Product Specifications

Standard = Standard   Optional = Optional   Not Available = Not Available

ModelFWD 5.4 (17'9")FWD 6.0 (19'8")

Tractor Requirements

Minimum horse power 65hp 70hp
Minimum weight 3500kg / 7716Lbs 4000kg / 8819Lbs

Base Unit Mounting Options

Front mount Not Available Not Available
Mid-mount Not Available Not Available
Rear mount Standard Standard
Three point linkage (CAT II) Standard Standard
Axle bracket Optional Optional

Overall machine parameters

Machine weight with head and oil 1640kg / 3616Lbs 1740kg / 3836Lbs
Capacity of oil tank 200L / 53USG 200L / 53USG
Weight of machine with oil but without head 1400kg / 3086Lbs 1500kg / 3307Lbs

Controls

Cable control (CC) Standard Standard
Low pressure hydraulics (LPH) Optional Optional
Electronic switch control (ESC) Optional Optional
Electronic proportional control (EPP) Optional Optional
Intelligent control system (ICS) Optional Optional
Cable rotor reverse Optional Optional
Electronic rotor reverse Optional Optional

Hydraulic system

System capability 60hp 60hp
Pump flow rate 104L / 27.5Usg 104L / 27.5Usg
Pump type (Gear / Piston / Helical) Gear Gear
Pump arrangement (Twin / Tandem Inline) Twin Twin
Independent hydraulics Standard Standard
Oil cooler Not Available Not Available

Arm features and main frame  

Forward reach arm Standard Standard
Forward reach 800mm / 2'6" 800mm / 2'6"
Power slew Standard Standard
Power slew angle 94° 94°
Gravity breakout protection Not Available Not Available
Hydraulic breakout protection Standard Standard
Arm float - Manual operation Optional Optional
Armfloat - Electronic operation Optional Optional
Head float - Manual operation Standard Standard
Head float - Electronic operation Optional Optional
Left hand cutting Optional Optional
Right hand cutting Optional Optional
Left and right hand cutting Not Available Not Available

Arm attachments available  

Variable track bracket (VTB) Not Available Not Available
Sheartrim cutter bar Optional Optional
Pro-Saw Optional Optional
Ditch cleaner Not Available Not Available
Rotary head Not Available Not Available

Accessories

Road Lights Standard Standard
Debris Blower Optional Optional
Warning Arrow (Magnetic / Fixed) Optional Optional
Cab Guard Kit Standard Standard

Cutting Heads

1.2m Pro-Trim with 115mm roller Optional Optional
1.2m Pro-Trim with 150mm roller Optional Optional
1.2m Pro-Trim ISMP with 115mm roller Optional Optional
1.2m Pro-Trim ISMP with 150mm roller Optional Optional
1.5m Pro-Trim with 115mm roller Optional Optional
1.5m Pro-Trim with 150mm roller Optional Optional

Flails

See the table below to see which flail heads are available for the different cutting heads listed above.

 BBMP44HS60Pro FlailT40T60True CutBushmaster
1.2m Pro-Trim with 115mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available
1.2m Pro-Trim with 150mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available
1.2m Pro-Trim ISMP with 115mm Roller Optional Optional Optional Optional Optional Optional Optional Standard
1.2m Pro-Trim ISMP with 150mm Roller Optional Optional Optional Optional Optional Optional Optional Standard
1.5m Pro-Trim with 115mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available
1.5m Pro-Trim with 150mm Roller Optional Optional Optional Optional Optional Optional Optional Not Available

Fittings & Add-ons

There are a number of fittings and add-ons available for this model. Click on the links below to find out more about the specific items available.

Working Reach Dimensions

Head used to calculations: 1.2 Pro Trim


 FWD 5.5m (17'9")FWD 6.0m (19'8")
A 5.36m 17'7" 5.96m 19'7"
B 5.52m 18'1" 6.08m 19'11"
C 3.50m 11'6" 4.21m 13'10"
D 4.87m 16' 5.19m 17'
E 6.65m 21'10" 7.27m 23'8"
X 1.35m 4'5" 1.35m 4'5"
Y 1.0m 3'3" 1.0m 3'3"